Lucent Technologies 555-233-119 status administered-connection

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-217status administered-connection
2
status administered-connection
This command provides automatic end-to-end connec tions between two
access/data end points.
Output
The following example shows the output from the status
administered-connection 3 command.
Communication
Type The valid voice and data c ommunication type that the ac cess
endpoint is administered . The options are: 56k-data, 64k-data,
voice-grade-d ata, and wideband.
Width For 56k-data, 64k-data, and voic e-grade data, the width value is 1. For
wideband, this field displays the number of DS0s that make up the
access endp oint.
Service State in-service/active, in-service/idle, and out-of-service
Connected
Ports Port location connected to the access endpoint for an active call. For
wideband, all p orts connected to the wid eband access end point are
listed.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
administered-
connection
ac
number
print
Administered connection numb er
Report sent to printer.
init
inads
craft
cust
rcust
bcms
browse
none none
status administered-connection 3 page 1 of 1
ADMINISTERED-CONNECTION STATUS
Connection Number:
Enabled?
Originator:
Destination:
Connection State:
Failure Cause:
Number of Retries:
Auto Restorable?