DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-47display capacity
2
display capacity
This form describes how you have ad ministered your system and provid es a
"snapshot" status of the switch resources.
The screen below shows the output from the display capacity command.
NOTE:
The capacities listed may not coincide with your system. The fig ures that
follow are included to help explain the command and the field values, not to
provide capacity information.
Ack? Headings 1 and 2 id entify the first and second O SS telephone
numbers, respectively. The entries b elow indicate the
acknowledged alarm state:
■y (yes) = alarm has been ac knowledged
■n (no) = alarm has not been acknowledged
■c (cleared) = alarm was fi rst acknowledged, then resolve d
and cleared
[Blank] = no attemp t was made to report the alarm
NOTE:
If the user disables the alarm orig ination with the change
system-parameters maintenance command , then the
Ack? field will be blank reg ardless of the true
acknowledged state of the alarm.
Date Alarmed Month, day, hour, and minute of the alarm.
Date Resolved Month, day, hour, and minute of the resolution (active alarms =
zeros)
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
display capacity
print
schedule
Report sent to printer
Command validated first, then a
scheduling form disp lays to
schedule execution of the
command. The command is then
placed in the command q ueue
and is executed at the specified
time. The information displayed is
sent to the system printer instead
of the screen.1
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
rcust
none none