DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-320test analog-testcall
2
test analog-testcall
This command performs fac ility diagnostic tests on an ent ire trunk group, an
individual trunk group member, an individual tr unk port, or on all trunks on a
board, depend ing on the options entered. The typ e of test call, the far-end test
line number, and the various other p arameters must be administered on the trunk
group form before exec uting the command. Normall y, the user should only
invoke the full or supervision test. The other options are provided primaril y for
testing when setting up an ATMS schedule.
Date Alarmed Day, hour, and minute of alarm.
Alarm Count Count of the current alarm entry versus the total numb er of alarms
to be tested.
Test results section
Port Port address (cabinet-c arrier-slot-circuit)
Maintenance
Name The name of maintenance object
Alt. Name Alternate way to identify maintenance ob jects.
If the Object is The field contains
station extension
trunk
xxx/yyy
(where
xxx
= trunk group numb er
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line grou p
number)
Test No The test being executed
Result Test result: Fail, Pass, Abort, or No Board. If this field has conflic t,
another user may be testing this hard ware.
Error Code Numeric code exp laining why the release failed or aborted . Refer
to the detailed list of the co des by test number for eac h MO.