DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-303BRI-SET, ASAI-ADJ, BRI-DAT
3
For all endpoint types, a sig naling link becomes "unbound " when it is
disconnected at Layer 2. For BRI endpoints suppor ting MIM initialization, a
signaling link may also b ecome "unbound" if a subsequent att empt to perform
SPID initialization on a "bound" link fails, (that is, wrong SPID is entered into the
endpoint by the user).
Table 3-133. TEST #626 Signaling Link Status Test
Error
Code
Test
Result Description/ Recommendation
1139 ABORT The Packet Bus in the port network is out-of-service.
1. Follow the repair procedures for the Packet Bus.
2. After completing Step 1, execute the test port long PCSSpp
command, and review the results of the BRI Port Local LAN Loop
Around Test to verify the repair.
1141 ABORT The PKT-CTRL is out-of-service.
1. Refer to PKT-CTRL (Packet Control Circuit Pack) Maintenance
documentation.
1144 ABORT The PPN Packet Bus is out-of-service.
1. Follow the repair procedures for the Packet Bus in the PPN.
2. After completing Step 1, execute the test port long PCSSpp
command, and review the results of the BRI Port Local LAN Loop
Around Test to verify the repair.
Continued on next page