DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-52ANL-LINE (8-Port Analog Line), ANL-NE-L (8-Port Neon Analog Line)
3
ANL-LINE (8-Port Analog Line),ANL-NE-L (8-Port Neon Analog Line)
The 8-Port Analog Line circuit p acks are:
■TN742
■TN769
■TN467
These circuit packs p rovide 8 ports for sing le line on-premises or off-premises
analog endpoints suc h as analog voice ter minals, queue warning level la mp,
recorded announceme nts, dictation machines, Pag ePac™ paging equip ment,
external alerting devic es, modems, facsimile mac hines, and AUDIX voice ports.
The TN769 supports a neon message waiting lamp. The other 8-port analog lines
do not support the lamp.
Test #48 may cause some terminal equipment to ring briefly during d aily
maintenance. If this ringing is disturbing the c ustomer or the terminal equip ment,
it should be disab led using the Tests field of the station admin istration screen.
However, on some releases of the software, this action d isables Tests #6, #47,
and #35 as well as Test #48. Test #47 may cause a false alarm when the port is
connected to off-p remises equipment, some non-voic e terminal equipment, and
some loop equipment. If this is the case, then the test should b e disabled usi ng
the Tests field of the change station
<extension>
command.
No maintenance of the terminal connec ted to the 8-Port Analog Line c ircuit pack
or 8-Port Neon Analog Line circuit p ack is performed , except to determi ne
whether or not the terminal is connected . Failures of the neon message waiting
lamp power (for ANL-NE-L only) and the c ommon ringing app lication circuitry are
reported as part of the Common Port Circuit Pack errors (see errors 1281 and
1793 i n the XXX- BD (C ommon Port C ircu it Pac k) Mai nten ance doc umen tatio n).
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run1
1. Where P is the port network number (1 for PPN); C is the carrier designation (for
example, A, B, or C); SS is the address of the slot in the carrier where the circuit pack
is located (for example, 01, 02, ..., etc.); and pp is the 2-dig it port number (for
example, 01).
Full Name of MO
ANL-LINE MIN test port PCSSpp l 8-Port Analog Line
ANL-LINE WRN test port PCSSpp sh 8-Port Analog Line
ANL-NE-L MIN test port PCSSpp l 8-Port Neon Analog Line
ANL-NE-L WRN test port PCSSpp sh 8-Port Neon Analog Line