DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-196reset board
2
reset board
This command performs a soft res et of every specified , administered por t on the
port circuit p ack. Ports must be busied out before the port circ uit pack resets.
!WARNING:

This command is service d isrupting and may c ause extraneous alarms.

Output
The following example shows the output from the reset board 1c07 command
and assumes that the board in p ort network 1, carrier c, s lot 7 is an analog board
with three administered ports.
Field descriptions
Result Success status of a busied out object (PASS, ABORT, FAIL)
Error Code System-generated descri ption of a command fail ure.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
reset board
location
repeat
number
Physical location of board:
PCSS
Number of times command
repeats (1– 99)
init
inads
craft
nms
carrier = 1
repeat
number = 1
none
Port Port address (cabinet-c arrier-slot) of the reset maintenance ob ject.
Maintenance Name Type of reset maintenance objec t.
reset board 1C07
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01C07 ANL-BD 53 PASS
Command Successfully Completed