Lucent Technologies 555-233-119 display communication-interface hop-channels

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-58display communication-interface hop-cha nnels
2
display communication-interface
hop-channels
This command displays the translation data for hop channe ls. A hop channel is a
bi-directional network c hannel between two interface links for DCS message
hopping. A hop channel is used to tandem DCS messages from one interface
link to another interface link. See ‘‘status link n’’ for more d etails.
Output for Hop-channels qualifier
When you enter the command display comm hop, the systems displays the Hop
Channel Assignment screen, similar to the sc reen below. The number of the local
processor channel, used to hop the interface link c hannels, is not shown.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
display
communication-
interface
hop-
channels
print|
schedule
Number of the local processor
channel
Report sent to printer
Command is validated and then a
scheduling form disp lays to
schedule execution of the
command. The command is then
placed in the command q ueue
and is executed at the specified
time. The information displayed
by the command is sent to the
system printer instead of the
screen.1
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
rcust
none none
Link/Channel A First of the two link/channels joined by th e hop channel. Links
range from 1 to 16. Channels range from 1 to 6 4. The
link/channel must not be assig ned to a local pro cessor channel
or to a PRI local processor channel.
display communication-interface hop-channels Page 1 of 4
HOP CHANNEL ASSIGNMENT
Link/Chan Priority Link/Chan Priority Link/Chan Link/Chan Priority
3 1 4 12