DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-36Logging On/Off
1
Figure 1-9. Command Permissions Categories (Page 3 of 3)
Testing a Login
1. Enter your login name at the login promp t.
After the user enters the correct logi n name and password and th e login is
administered correc tly, the system displays the command line interface.
2. Turn on the administration terminal. Verify that the screen displays:
login:
3. Enter your login name, then press Enter. Verify that the screen displays:
password:
4. Enter your password, then press Ente r.
For security reasons, the password is not d isplayed as you type it. The
system verifies that a valid login and password name were entered. If an
invalid login or pass word name was entered, the screen d isplays:
login incorrect:, and you must repeat the proc edure.
If the system recognizes the login a nd password name, verify that the
screen displays the softw are version.
5. For your terminal type, complete one of the following:
a. If the terminal is a 513 BCT, press Ente r. The 513 in brackets [513] is
the system default terminal.
b. If the terminal is a 610 BCT or a 615 MT that has a 513 emulation
cartridge, press Enter.
c. If the terminal is a 610 BCT or a 615 MT that does not have a 513
emulation cartridge, enter 4410 and press Enter.
d. If the terminal is any other of the types liste d, enter the terminal type
and press Enter .
Page 3 of 3
COMMAND PERMISSION CATEGORIES
RESTRICTED OBJECT LIST
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________