Lucent Technologies 555-233-119 Invalid LAPD Frame Error Counter Test (#597)

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-360CLAN-BD (Control LAN Circuit Pack)
3
Invalid LAPD Frame Error Counter Test (#597)
This test is non-destructive.
CLAN detects invalid fr ames when it receives
■a frame with a CRC error
■an unrecognizable frame
■a recognizable frame in an unexpected state
When the CLAN circuit pack d etects an invalid LAPD frame, it inc rements the
Invalid LAPD Frame error counter. This test reads and c lears the counter, and
verifies the repair of the problem.
Errors may indicate a
■circuit pack problem
■packet bus problem
■problem with another circ uit pack on the bus
Table 3-158. TEST #597 Invalid LAPD Frame Error
Counter Test
Error
Code
Test
Result Description/ Recommendation
2000 ABORT Did not receive circuit pack test response within the allowable time period.
1. Retry command at 1-minute intervals, up to 5 times.
2. If the problem persists, reset the circuit pack (reset board UUCSS).
3. If the problem persists, replace the circ uit pack.
2100 ABORT Could not allocate the necessary system resources to run this test.
2500 ABORT Internal system error.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the problem persists, escalate the problem.
1-10 FAIL The circuit pack detects LAPD frame errors. The error code indicates the
value of the on-board error counter.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the test continues to fail, execute the Packet Interface Test (#598) (test
board UUCSS long).
3. If Packet Interface Test (#598) fails, refer to Packet Bus repair procedures.
PASS Circuit pack detects no errors.
Continued on next page