Lucent Technologies 555-233-119 clear errors, clear interface

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-37clear errors
2
Feature Interactions
Status audits displays data c leared by the clear audits com mand. After clear
audits executes successfully, the display audits cumulative and/or display
audits peak-hour commands display information collected since the last clear
audits command. The start date d isplays on the status audits sc reen reflecting
the time that clear audits executed.
clear errors
The clear errors command moves errors and resolved alarms to cleared -error
lists, making room for new incoming error messages. This command does not
clear active alarms from the alarm log . This command must be used with c are to
prevent overwriting cleared entries. When additional entries are neede d to log
new errors, the system clears error entries first. Use the display errors command
to list the cleared errors.
clear interface
The clear interface c ommand reintializes counter values maintained by the
Processor Interface (PI) circuit pac k. The status interface command, used in th e
development environment, disp lays the counters. The PI circuit pac k, a front end
processor, implements the p acket and link layers of the BX.25 protoc ol, and the
ISDN procedure-D protocol.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
clear audits
cumulative
peak-hour
Clears data collected ab out the
peak hour since the last reboot
or clear audits cumulative
command
Clears peak hour data
Examples:
clear audits cumulative
clear audits peak-hour
init
inads none See below
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
clear errors Examples:
clear errors init
inads
craft
none none