DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-336CARD-MEM (Memory Card)
3
System Technician-Demanded Tests: Descriptions
and Error Codes
Always investigate tests in the order p resented in the table below. By c learing
error codes associated with the

Memory Card Insertion Test

for example, you
may also clear errors generated from o ther tests in the testing sequence.
Note:
a. Refer to 12V-PWR (12 Volt Power Supply) Maintenance document ation for
a description of this test.
Memory Card Erase/Write/Read Test (#693)
The purpose of this test, which is nond estructive, is to verify the erase, write, and
read operations. The test erases the bac kup copy of the translation file stored in
the memory card, and it ve rifies that the erase operation works. The test then
writes the primary cop y of the translation file from the same memory card to the
erased flash segment, and it v erifies that the translation file is written
successfully.
This test can be initiated through a s ystem technician demand ed test card-mem
long command, or it can b e executed as part of a mai ntenance test sequence
when the save translation and save announcements operations fail. The test
Table 3-145. System Technician-Demanded Tests: CARD-MEM
Order of Investigation
Short Test
Sequence
Long Test
Sequence
Reset Board
Sequence D/ND1
1. D = Destructive; ND = Nondestruc tive
12 Volt Power Supply Test (#701) (a) X X ND
Memory Card Insertion Test (#695) X X ND
Memory Card Format and Read Test (#696) X X ND
Memory Card Match Test (#697) X X ND
Memory Card Write-Protected Test (#698) X X ND
Memory Card Directory Recovery Test (#699) X X ND
Memory Card Translation Data Integrity Test
(#694) XND
Memory Card Erase/Write/Read Test (#693) X ND
Continued on next page