Lucent Technologies 555-233-119 busyout data-module

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-6busyout data-module
2
busyout data-module
This command puts the sp ecified data mod ule in a maintenance busy state , even
uninstalled data modules. No p eriodic or sch eduled tests is perfor med on the
busied out data mod ule or data channel until it is released and no call
processing ca n be executed on the d ata modules or over the data c hannels.
Warning alarms are generated (error typ e 18) on each maintenance ob ject
busied out, so that INADS can acc ess the state of the object s. The release data
module command returns the spec ified data mod ule (or data channel) to
operation.
On a system with the duplication option, a busyout of a Network Control Data
Channel (DATA-CHL) or a Processor Interface Port Data Channels (PI-PT) are
preserved across SPE interchanges. The data ch annel extension must be
released before the data c hannel can be broug ht back into servic e.
Output
The following example shows the output from the busyout data-module 300
command.
Result Test result: Pass, Abort, or Fail
Error Code Numeric code exp laining why the release failed or ab orted. Refer
to the detailed list of the co des by test number for eac h MO.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
busyout
data-module
extension Extension number (per
dial-plan)
Exampl e:
busyout data-module 31300
init
inads
craft
nms
None None
busyout data-module 300 SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1103 DIG-LINE 300 PASS
Command successfully completed