DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-299BRI-SET, ASAI-ADJ, BRI-DAT
3
If the error type is less than 3968, then the ISDN-BRI cause cod e is equal
to the error type minus 3840. This code was sent to the s witch by the
endpoint.
A description of the various ISDN-BRI cause values is contained in Table
10-65. This table also contains recommend ed system technician ac tions
associated with the cause value. Further information can also be found in
the Lucent ISDN-BRI Specification (801-802-100). In ad dition, the Aux
Data field of the Error Log entry c ontains additional diag nostic information.
n. Error 3847 indicates that sets on the port d o not support level 3
initialization. Consult the Set Service documentation
o. For the Error 2567 indicates that the version of ASAI is not supp orted,
check version of the software running on the ASAI or Lucent adjunct.
p. For Error 2568 indicates that the adjunc t id is invalid, chec k the vender id
or software running on the Lucent ad junct.
Table 3-131. ISDN-BRI Cause Values
Code Explanation Recommendation
Channel in use
1 Requested channel is in use by another station on
the BRI-PORT. (Not applicable for ASAI or Lucent
adjuncts.)
For BRI endpoints:
1. Try to originate a call to or from this port.
2. If the error persists, busy out and release the
port.
3. If the problem still persists, replace stations on
the port.
Switch resources
not available
34 No circuit or
channel
available
A resource on the switch is unavailable for a call.
For BRI endpoints: This cause value is not logged.
For ASAI or Lucent Adjuncts: This condition means
that there are no available trunks for an outgoing
call request.
1. Verify that the adjunct is administered to
support the trunk capabilities of the switch.
2. Investigate trunk group status by issuing status
trunk commands from the SAT or by requesting
a trunk group query or queries from the adjunct.
3. Perform trunk diagnostic procedures outlined in
this manual.
Continued on next page