DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-13busyout pri-endpoint
2
Output
The following example is a display of the busyout port command.
Field descriptions
busyout pri-endpoint
This command places all PRI endp oint ports (B-channels) assoc iated with the
specified PRI endpoi nt in a maintenance busy (system tec hnician busy) state. No
periodic or sc heduled tests are perfor med on the busied out PRI endp oint ports
until they are released. When the PRI endpoint port is maintenan ce busy it is
deactivated (no c all processing ac tivity may include the b usied object). Warning
alarms (error type???) are generated on each busie d out port. The command,
release pri-endpoint, reactivates all ports (B-ch annels) associated with the
specified PRI endpoint ex tension and the switch attemp ts to negotiate with the
far-end PRI terminal adapter to reactivate eac h PRI endpoint port (B-chan nel).
Port Port address (cabinet- carrier-slot-circuit)
Alt. Name Alternate way to identify maintenance ob jects.
If the Object is The field contains
station extension
trunk
xxx/yyy
(where
xxx
= trunk group numb er
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line g roup number)
Maintenance Name Type of busied out maintenanc e object.
Result Test result: Pass, Abort, Fail
Error Code Numeric code exp laining why the release failed or ab orted. Refer
to the detailed list of the cod es by test number for eac h MO.
busyout port 01C0701 SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C0701 ANL-LINE PASS
Command successfully completed