DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-325test card-mem
2
Field descriptions
test card-mem
This command executes a seq uence of tests on the memory card in the
specified switc h processor element. The test seque nces in order for both long
and short options are listed in the following table:
These tests verify the sanity of the memory card de vice, the basic
read/erase/write operations to the memory c ard, the integrity of the translat ion
data stored in the memory card , the function of 12-volt power sup ply used for
memory card erase/write ope rations, and the translation cap acity of the memory
card. This command c an also help troubleshoot the following hardware errors:
CARD-MEM, 12V-PWR, CAP-MEM, and FL-DATA.
Port Port address (cabinet- carrier-slot-circuit)
Maintenance
Name The name of maintenance object
Alt. Name Alternate way to identify maintenance ob jects.
If the Object is The field contains
station extension
trunk
xxx/yyy
(where
xxx
= trunk group numb er
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line group
number)
Test No The test being executed
Result Test result: Pass, Fail, Abort, Disabled, No Board, or Extra Board.
Error Code Numeric code exp laining why the release failed or ab orted. Refer
to the detailed list of the cod es by test number for eac h MO.
Test Short Long
12 Volt Po wer Sup ply Te st (#70 1) X X
Memory Card Insertion Test (#695) X X
Memory Card Format and Read Test (#696) X X
Memory Card Match Test (#697) X X
Memory Card Write-Protected Test (#698) X X
Memory Card Directory Recovery Test (#699) X X
Memory Card Translation Data Integrity Test (#694) X
Memory Card Erase/Write/Read Test (#693) X
Memory Card Capacity Test (#1014) X