DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands

2-323test board

2
test board

This command performs a set o f hardware diagnostic tests on a specified c ircuit

pack. The system first validates that the b oard exists at the spec ified location.

Then, based on the logical type of board (for example, Analog, Digital, Hybrid,

and others), a series of tests perfor m diagnostics on the b oard and then returns

results of the test along with any possib le error codes. Some of the tests can b e

disabled by administration.

For the R6csi system, the test board 01A01 command tests all of the

components associated with the processor circ uit pack excep t for environmental

components and system l inks, which require the test environment and test

sys-link commands, respec tively. The processor components are tested in the

following order: PROCR, PR-MEM, SW-CTL, PKTINT, DATA-BD, DATA-CHL,

12V-PWR, CARD-MEM, and PR-MAINT.

Action/
Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
test board
location
short
long
repeat
number
clear
schedule
Physical location of the board
PCSS
Option for a brief series of
nondestructive diagnostic tests.
Option for a longer, more
comprehensive test series
(includes a destructive test)
How many times each test in the
sequence is repeated (1-100)
This option causes the test
sequence (short or long) to repeat
until the alarm (if any) is cleared or
a single test in the sequence fails.1
Command is validated and then a
scheduling form disp lays to
schedule execution of the
command. The command is then
placed in the command queue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.2
Exampl es:
test board 01c11 l
test board 01c11 l schedule
test board 02b15 sh r 2
test board 01c08
test board 02d12 r 4
test board 02d12 c
1 If no alarms are registered against the m aintenance object then the test sequenc e is run only once. The
long
clear
option forces a clear of all alarms if no errors are encountered during testing. The
short clear
option only
clears alarms pertinent to tests in the short sequence. SEE WARN ING BELO W.
2 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
nms
Test
sequence
= short;
repeat = 1
none