DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-1014SYS-LINK (System Links)
3
down. The other path, the faulted p ath is present if the link has ever gone d own
or never come up. If the link c ame up and went down, then the faulted path is
marked "Present". If the link never came up, the faulted path is marked "Default".
Either case, it represents the path on whic h the link was attempted or estab lished
unsuccessfully.
Test command for the system links, test sys-link PCSSpp can be specified with
current or faulted as an optional argument if the user wishes to test all the
components in the spec ified path. The tests executed will be the same if the user
were to test each component manual ly. In the event that the user does not
specify any path, the n only the tests specified for the system links are executed.
System Link Status (#985)
This non-destructive test queries the switc h for the status of the system link and
verifies that all switch comp onents have the same view of the link state.
Order of Investigation
Short Test
Sequence
Long Test
Sequence D/ND1
1. D = Destructive, ND = Non-destruc tive
System Link Status (#985) X X N
Table 3-449. TEST #985 System Link Status
Error
Code
Test
Result Description/ Recommendation
1007 ABORT Could not locate the system link associated with this location
1. Retry the command at 1-minute intervals for a maximum of 5 times.
2500 ABORT Internal system error
1. Retry the command at 1-minute intervals for a maximum of 5 times.
6 FAIL The system link is down.
1. Follow the procedure for error type 13.
PASS The system link is up.