DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-254status conference
2
Rate Adpt Rate adaptation/Interworking ind icator = 5, 6, y, c, e, n, blank. 5 and
6 apply to Low Speed/Hig h Speed Interworking. All other va lues apply
to Rate Adaptation.
“5”= 56-kbps (Low Speed) endpoints join High Spee d (128 kbps or
above) conferences. This end point connects with aud io only
capability, b ut is not a valid video sourc e and destination.
“6” = 64-kb ps (Low Speed) endp oints join High Speed (128 kb ps or
above) conferences. This end point connects with aud io only
capability, b ut is not a valid video sourc e and destination.
“y” = This endp oint joins the conference at 64 kb ps, but bec ause
another endpoint trigg ers rate adaptation to 56 kb ps, this endpoint
rate adapts to 56 kbp s.
“c” = 64 kbps endp oints join the conference at 56 kb ps. The first 56
kbps endp oint that joins 64 kbps rate ad aptable conferenc es triggers
rate adaptation (see Join Time below).
“n” = Another end point triggers a 6 4-kbps conferenc es to rate adapt
to 56 kbps. This endpoint joins the conference at 64 kbp s, but
encounters problems with rate a dapting to 56 kb ps. This endpoint
may have audio and may be receiving video, but is not a valid video
source.
“blank” = No endpoint trigg ers rate adaptation. If this end point is
active, it joins the conferenc e at the administered ba ndwidth.
Bond Mode BONDing Mode - blank. This field is blank for calls that are not related
to bonding.
Ts The talking state of the endpoint - t, m, M, S, blank.
“t” = The endp oint detects voic e energy (talking).
“m” = The endp oint indicates that it is muted to the MCU. Endpoints
may mute, but not send an indic ation to the MCU.
“M” = UDD/CRCS Agent interfac e mutes the endpoint’s aud io. M
displays when both the end point and the UCC/CRCS Agent mute the
endpoint audio.
“S” = the solo-audio state set by UCC/CRCS Agent mutes the
endpoint’s audio. While in solo-aud io state, new endpoints joining the
conference automatically mute.
“blank” = The endpoint does not d etect voice energy (talking ).