DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-95enable administered-connection
2
enable administered-connection
This command restarts sched uled and period ic maintenance for a singl e or all
administered connec tions and can be used to track the maintenance p rocessing
of administered connec tions without interference from other maintenanc e
processing. This command also restarts the processing of in-line errors for all or
the selected administered connection.
enable mst
Enables the message trace that is c ontrolled according to the parameters
created with the change mst command . If executed while the trac e is enabled,
the command has no effect and returns a screen message ind icating that the
command was successful.
enable suspend-alm-orig
This command enables Suspend Alarm Origination for a board (including all
ports and endp oints on the board) or for a p ort (including all en dpoints on the
port) for both on- and off-b oard alarms or for off-board alarms only. Many control
circuit packs d o not have a board loc ation, so this command cannot s upport all
circuit packs. Eac h enable command b ecomes a new entry or replac es an
existing entry in the Suspend Alar m Origination table. A new entry that matches
both the physical loc ation and off-only, on-, and off-board sp ecifications of an
active entry replaces the active entry in the Suspend Alar m Origination table.
On the command line, spec ify a time-out duration of 1 - 72 hours. The

off-board-only

is optional; if the keyword is not sp ecified, the entry susp ends
Alarm Origination for both on-and off-board alarms.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
enable
administered-
connection
ac number
all
The number of the administered
connection
All administered connections are
enabled.
Examples:
enable administered-connection 128
enable administered-connection all
init
inads
craft
cust
rcust
mis
none none
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
enable mst init
inads none none