Lucent Technologies 555-233-119 - page 388

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-220status audits
2
■The date and time that the audit first d etected a prob lem (only for
cumulative)
■The time of the most recent error detected b y the audit (only for
cumulative)
Audit data information c umulates from the last reboot or the last clear audits
cumulative command, and for p eak hours since the last reboot or the last c lear
audits peak-hour or clear audits cumulative commands.
NOTE:
Single process restarts, warm starts, c old 2 restarts, cold 1 restar ts, or
processor interchang es do not clear this data.
Audits can execute d irectly using the test MO c ommand. For example, test MO l
8192 p 512 t 0 executes the Station Connections Aud its, audit lnames and
numbers (pnames) includ ed in the Table Of Audits. When the “test MO”
command executes an aud it, report results disp lay on the screen. In general,
errors discovered from a dema nd tests are not logged in the error logs. To be
consistent with other error loggin g, and to avoid co nfusion, errors that are
discovered from a dema nd test that executes an audit are not d isplayed.
The screen does not automatically upd ate, but reflects the system at the time of
the request.
Action/
Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status audits
peak-hour
cumulative
print
schedule
data collected since the last reboot
or since the last execution of the
clear audits cumulative
command.
Data for the peak hour since the
last reboot or since the last
execution of the clear audits
cumulative or clear audits
peak-hour command.
Report sent to printer
Command is validated and then a
scheduling form disp lays to
schedule execution of the
command. The command is then
placed in the command queue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.1
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads none see below