DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-315test alarms
2
Output
The following example shows the output for the test access-endpoint 22502
command, and assumes th e access endp oint ports for extension 22502 are in
cabinet 1, carrier C, slot 1 1, circuit 1 to 6. The responses are disp layed on a
port-by-port and test-by-test basis with one li ne of data for each test result.
Field descriptions
test alarms
This command allows automatic testing all of the hardware associated with the
active alarms in the alarm log. This c ommand provides an in itial query form to
help the user narrow the selection of alarmed ob jects. After submitting the query
form, the system tests the hardware associated with the selected alarm log
entries. The results display in standard test output and status information display
on the message line as the command progresses.
Port Port address (cabinet-c arrier-slot-circuit)
Maintenance
Name The name of maintenance object (wid eband acc ess endpoint =
WAE-PORT; single port access endpoint = TIE-DS1)
Alt. Name The extension number of the access en dpoint
Test No The test being executed
Result Test result: Pass, Abort, Fail, No Board, Disabled
Error Code Numeric code exp laining why the release failed or ab orted. Refer
to the detailed list of the co des by test number for eac h MO.
test access-endpoint 22502 short page 1 of 1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01C1101 WAE-PORT 22502 36 PASS
01C1102 WAE-PORT 22502 36 PASS
01C1103 WAE-PORT 22502 36 PASS
01C1104 WAE-PORT 22502 36 PASS
01C1105 WAE-PORT 22502 36 PASS
01C1106 WAE-PORT 22502 36 PASS
Command Successfully Completed