DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-317test alarms
2
!WARNING:

Executing a clear with short op tion may not clear all alarms, even if all tests

pass.

!WARNING:

Since the “clear long ” options clear all c ounters if tests pass, it is possib le

for firmware counters to be c leared even when a problem exists. In some

cases customer servic e might degrade since calls may be routed over

defective equip ment.
Feature Interactions
With the enhancement of multiple maintenanc e users, there may be a possibility
of two users attempting to test the same p hysical hardware (for example, one
using the test alarms command and another using the test board command). If
this command attempts to test a board that is currently being tested by another
user, a error message display s.
Options form
After entering the test alarms command , you are presented with an options for m
for alarm selection.
test alarms repeat 1
HARDWARE TEST ALARM QUERY
The following options control which alarms will be tested.
ALARM TYPES
Major? y_ Minor? y_ Warning? y_
REPORT PERIOD
Interval: m_ From: __/__/__:__ To: __/__/__:__
EQUIPMENT TYPE ( Choose only one, if any, of the following )
Cabinet: __
Port Network: __
Board Number: ____
Port: ______
Category: ________
Extension: _____
Trunk ( group/member ): __/__