DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-3busyout board
2
Output
The following example shows the output for the busyout access-endpoint
22502 command and assume s that access endp oint ports for extension 22502
are in cabinet 1, carrier C, sl ot 11, circuit 1 to 6. The responses dis play on a
test-by-test basis with one line of d ata for each test result.
Field descriptions
busyout board
This command puts all the p orts associated with the sp ecified acc ess endpoint
in a maintenance busy (c raft busy) state. No period ic or scheduled tests are
performed on the busi ed out access end point ports until they are released. When
the access endp oint ports are maintenance b usy, the access endpoint is
removed from active service o n the switch, meaning that no c all processing
activity can includ e the busied obj ects because term inals on the administered
ports do not receive d ial-tone. Warning alarms are generated on each busied out
port in the access end point. The release access-endpoint command returns all
the ports associated with the specified ac cess endp oint to operation.
Port Port address (cabinet-c arrier-slot-circuit)
Maintenance Name Name of maintenance objec t (WAE-PORT = wideband access
endpoint; TIE-DS1 = single port access endpoint)
Alt. Name The alternate way of identifying the maintenanc e object, in this
case, the extension number of the ac cess endpoint.
Result Test result: Pass, Fail, Abort
Error Code Numeric code exp laining why the release failed or ab orted. Refer
to the detailed list of the co des by test number for eac h MO.
busyout access-endpoint 22502 SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1101 WAE-PORT 22502 PASS
01C1102 WAE-PORT 22502 PASS
01C1103 WAE-PORT 22502 PASS
01C1104 WAE-PORT 22502 PASS
01C1105 WAE-PORT 22502 PASS
01C1106 WAE-PORT 22502 PASS
Command Successfully Completed