DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects

3-356CLAN-BD (Control LAN Circuit Pack)

3
Control Channel Loop-Around Test (#52)

This non-destructive test fails if the circ uit pack does not return to a sane state

after being reset. This test queries the c ircuit pack for its c ode and vintage, and

verifies its records.

Table 3-154. TEST #52 Control Channel Loop-Around Test
Error
Code
Test
Result Description/ Recommendation
None
2100 ABORT Could not allocate the necessary system resources to run test.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the problem persists, escalate the problem.
FAIL The circuit pack failed to return the code or vintage.
1. Retry command at 1-minute intervals, up to 5 times.
2. Reset the board (reset board UUCSS).
3. If reset aborts with error code 1115, busyout (busyout board UUCSS),
reset (reset board UUCSS), and release board (release board UUCSS).
4. If test continues to fail, replace the circuit pack.
5. Escalate the problem if failures continue.
PASS Test successful.