DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-829MET-LINE (MET Line)
3
Table 3-359. TEST #61 MET Line Station Audits Test
Error
Code
Test
Result Description/ Recommendation
ABORT Internal System Error.
1 ABORT The test was aborted due to an internal system error during the
switchhook audit.
2 The test was aborted due to an internal system error during the bad
scan inquiry.
3 The test was aborted due to an internal system error during the EPF
audit inquiry.
1. Make sure that the station is not in an out-of-service state.
2. Retry the command at 1-minute intervals for a maximum of 5 times.
1000 ABORT System resources required to run this test are not available. The port
may be busy with a valid call. Use the display port PCSSpp command
to determine the station extension, attendant number, or trunk
group/member num b er of the port. Use the status station, status
attendant, or status trunk command to determine the service state of
the port. If the service state indicates that the port is in use, then the
port is unavailable for certain tests. You must wait until the port is idle
before retesting. Attendants are always in use (off-hook) if the handset
is plugged in and the port is not busied out.
1. If the port status is idle, then retry the command at 1-minute
intervals a maximum of 5 times.
1004 ABORT The port was seized by a valid call during the test. The test has been
aborted. Use the display port PCSSpp command to determine the
station extension, attendant number, or trunk group/member number of
the port. Use the status station, status attendant, or status trunk
command to determine the service state of the port. If the service state
indicates that the port is in use, then the port is unavailable for certain
tests. You must wait until the port is idle before retesting. Attendants are
always in use (off-hook) if the handset is plugged in and the port is not
busied out.
1. Retry the command at 1-minute i ntervals a maximum of 5 times.
2000 ABORT Response to the test request was not received within the allowable time
period.
1. Retry the command at 1-minute i ntervals a maximum of 5 times.
FAIL The test failed due to an internal system error.
1. Retry the command at 1-minute i ntervals a maximum of 5 times.
Continued on next page