DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-401CO-TRK (CO Trunk)
3
1004 ABORT The port was seized by a user for a valid call. Use the display port
PCSSpp command to determine the trunk group/member number of the
port. Use the status trunk command to determine the service state of the
port. If the service state indicates that the port is in use, then the port is
unavailable for certain tests. You must wait until the port is idle before
retesting.
1. If the port status is idle, retry the command at 1-minute intervals a
maximum of 5 times.
1005 ABORT Test inapplicable to present configuration. This is a normal condition.
1018 ABORT Test has been disab led via administration.
1. Verify that the Maintenance Tests? field on the Trunk Group
Form is set to n. To enable the test, issue the change trunk-group x
command where "x" equals the number of the trunk group to be tested.
Then change the entry in the Maintenance Tests? field on the
form to y.
2000 ABORT Response to the request was not received within the allowable time period.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Table 3-174. TEST #3 CO Demand Diagnostic Test — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page