DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-119ANN-PT (Announcement Port)
3
announcements will not work, since the record p ort looks busy to the
circuit pack. No te that software does not have any way of knowing this and
attempts to use the ports.
If the circuit pac k is locked into this state, the following symptoms are
observed:
1. When attempting to record an announc ement, users hear the
proper record tone, b ut the announcement does not rec ord (they
do not know it until the announcement is p layed back).
2. Performing a test board long when the circuit pack is in this state
yields the following abo rt codes:
■Ports 1 and 9 abort Test #206 with code 1024
■Ports 1 and 9 abort Test #205 with code 2000
■Board level Tests #209 and #210 abort with cod e 1024
3. The save/restore announcements command times out with:
Error encountered, can’t complete request
The Announcement circuit pac k lock-up c an be cleared remotely b y
performing a soft reset to the c ircuit pack:
■busyout board PCSS (this command drops all calls in progress on
the Announcement circuit p ack)
■reset circuit pack using the reset board PCSS command
���release circuit pack u sing the release board PCSS command
140AY Channel Sanity Inquiry Test (#222)
The Angel keeps a sanity status bit for each of the 16 channels on the 140AY
device. This test queries the Ang el to determine the status for a p articular
channel. If a channel is insane, that imp lies that announcements cann ot be
played bac k on that channel.
Table 3-46. TEST #222 140AY Channel Sanity Inquiry Test
Error
Code
Test
Result Description/ Recommendation
2000 ABORT Response to the test request was not received within the allowable time
period.
2100 ABORT Could not allocate the necessary system resources to run this test.
ABORT Internal system error.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page