DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands

2-17busyout tone-clock

2
Output

The following example is a display of the busyout tdm command.

Field descriptions
busyout tone-clock

The busyout tone-clock comman d places the sp ecified tone/clo ck in a

maintenance busy state. No pe riodic or sched uled tests are performed on the

busied out objec t until it is released. When the objec t is maintenance busy it is

deactivated (no c all processing ac tivity may include the b usied objec t). Warning

Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
busyout tdm
pn
number
bus
pn number = TDM bus Port
Network number to be busied
out.
bus =
a
(default control bus) or
b
(default tone bus) specifies
desired half of TDM bus. Each
512 time slot TDM bus
configures as two duplicate 256
time slot buses. This division
allows duplication of control
channels and dedicated tone
time slots.
Examples:
busyout tdm 1a
init
inads
craft
none If a bus is busied
out, no calls are
torn down. and
no new calls are
set up.
Dedicated tone
time slots must
be moved to
another bus (the
other half of the
duplicated bus)
before a busyout
of a particular
bus is allowed.
Port Port address and assoc iated TDM number and bus (PNA or PNB)
Alt. Name Not applicable
Maintenance Name Type of busied out maintenance o bject: TDM-BUS
Result Test result: Pass, Abort, Fail
Error Code Numeric code exp laining why the release failed or ab orted. Refer

to the detailed list of the co des by test number for eac h MO.

busyout tdm port-network 1 bus a SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
PN 01A TDM-BUS PASS
Command successfully completed