Lucent Technologies 555-233-119 release tdm

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-193release tdm
2
release tdm
This command removes specif ied tdm buses from a maintenanc e busy state.
Feature Interactions
■The system tears down busied out buses. No new calls can be
administered on busied out buses.
■To prevent busyouts of particular buses, technicians should move
dedicated t one time slots to another bus (the other half of the d uplicated
bus).
Output
The following example shows the output from the release tdm port-network 1
bus a command.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
release tdm
port-net
work pn
number
bus bus
Port network number of the TDM
bus
(“a” or “b”) sp ecifies desired half of
the TDM bus. Each 512 time slot
TDM bus is configured as two
duplicate 256 time slot buses. This
division allows for duplication of
control channels and dedic ated
tone time slots. The default control
bus (carrying the control c hannel)
is the “a” bus, while the default
tone bus (carrying dedic ated
tones) is the “b” bus. (1 - 3)
init
inads
craft
none see below
release tdm port-network 1 bus a
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
PN 01A TDM-BUS PASS
Command successfully completed