DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-116ATM Tips
1
It may be necessary to re-admi nister the A500 port boards. Refer to
the

Cajun A500 Quick Reference

for further information.
■If Admin Status or State is incorrect, the links will not c ome up
between the PPN and the EPN.
TN230X
Did the TN230X come up correctly?
1. Review the LED conditions for the TN230X:
■Do the TN230X LEDs (see Table 1-14) indicate a normal
operational state (any of the following ):
— Active in the PPN
— Stand by in the PPN
— Arc hangel mode in the EPN
— Stand by in the EPN?
2. If after board insertion or a d emand reset:
■Do the TN230X LEDs indicate that it is booting?
■Do the TN230X LEDs indicate it is downloading its DSPs?
■Do the TN230X LEDs indicate that board insertion has not yet
occurred?
■Do the TN230X LEDs indicate a maintenance alarm?
3. Enter list configuration carrier

cabinetcarrier

on the DEFINITY SAT. See
Figure 1-45 (1b) and Figure 1-46 (2a) be low.