DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-292status pri-endpoint
2

Field Description

status pri-endpoint
This command displays in ternal software state information for diag nosis and can
help locate facilities with wh ich a PRI endpoint is communic ating. Status
information for each of the B-chann els making up the PRI endpoint d isplay in
addition to some overall PRI endpoint infor mation.
Output
The following example shows the output for the status pri-endpoint 225 01
command and assumes the following:
■PRI endpoint ports for extension 22501 are in cab inet 1, carrier B, slot 20,
circuit 1 to 6.
■The ports 1 to 3 of the specified PRI endpoint are connected on an active
call to ports 13 to 15 of b oard in location 1B19 (cab inet 1, carrier B, slot
19).
■Ports 4 and 5 of the specified PRI endpoint are idle.
Physical Link
State Up, down, or extension not administered displays. The PMS link is
considered ad ministered only if an extension is given in t he
System Hospitality form.
Protocol State "up", "down", or blank if not administered.
Number of Retries Number of times the switch has tried to set up the link. Displays
when the link is down. (1–999)
Maintenance Busy "yes", or "no" (that is, system technician has or has not busied out
the link). Blank if PMS link not administered.
Action/
Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
pri-endpoint
extension
print
PRI endpoint extension to be
displayed (see dial-p lan).
Report sent to printer
Exampl es:
status pri-endpoint 25012
status pri-endpoint 77868
status pri-endpoint 66078 print
init
inads
craft
nms
browse
none none