Lucent Technologies 555-233-119 NPE Connection Audit Test (#50):

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-558DS1-BD (DS1 Interface Circuit Pack)
3
NPE Connection Audit Test (#50):
The system sends a message to the on-b oard microprocessor to u pdate the
network connectivity translation for all the Ne twork Processing Elements (NPEs)
on the circuit pack .
CSU Equipment Loopback Test
(#1210) XD
CSU Repeater Loopback Test
(#1211) XD
CPE Loopback Jack Test (#1212) X D
Far CSU Loopback Test (#1213) X D
One-Way Span Test (#1214) X D
Inject Single Bit Error (#1215) X D
End Loopback/Span Test (#1216) X D
1. D = Destructive, ND = Non-destruc tive
Table 3-235. TEST #50 NPE Connection Audit Test
Error
Code Test Result Description/ Recommendation
None
2100 ABORT System resources required for this test are not available.
1019 ABORT Test already in progress.
FAIL Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
PASS The circuit pack’s NPEs have been updated with their translation.
Continued on next page
Table 3-234. System Technician-Demanded Tests: DS1-BD — Continued
Order of Investigation
Short Test
Sequence
Long Test
Sequence
Reset
Board
Sequence
test
ds1-loop
Command D/ND1
Continued on next page