DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-346test inads-link
2
Field descriptions
The following example shows the output for the

test hardware-group system

with the
background
option selected.
test inads-link
This command attempts to make a c all over the inads port on the maintenance
board to verify the INADS alarm notification p rocess. In the default setting s, the
system test the link to the first OSS telephone number. If there is an alarm
pending to b e reported or the call is in progress or up, then the test ab orts. If the
alarm origination to the OSS telephone number to b e tested is disabled , then the
test generates an informative error and th e test continues. The test waits 2
minutes before dialing the c all to allow the remote maintenance technic ian to
logoff, thus freeing the line. A

local

SAT user entering the test inads-link
command does not need to log off for the system to plac e the call, but the
two-minute delay still exists.
Once the call is answered b y INADS, the system sends a message with a test
alarm type. INADS acknowledg es receipt of the messag e and creates a trouble
ticket. The trouble ticket is closed immediately and has a “ INADS LINK TEST”
message entered in the desc ription field. If an alar m is raised while the test call is
up, the system does not send an a larm message over the existing link. The
Port Port address (cabinet-c arrier-slot-circuit)
Maintenance
Name The name of maintenance object
Alt. Name Alternate way to identify maintenance ob jects.
If the Object is The field contains
station extension
trunk
xxx/yyy
(where
xxx
= trunk group numb er
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line grou p
number)
Test No. The test being executed
Result Test result: No Board, Extra Bd, Disabled, or Skipp ed
Error Code Numeric code exp laining why the release failed or ab orted. Refer
to the detailed list of the co des by test number for eac h MO.
test hardware-group system
Command started in background mode