DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands

2-369test processor

2
test processor

This command performs hard ware diagnostic tests on a sp ecified proc essor

circuit pack.

Defaults
■For SPE sim plex syste ms, th e loc ation is op tiona l and defa ults t o cab inet

1, carrier a.

■Defaults for the remaining parameters are shor t with a repeat of 1.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
test
processor
location
short
long
clear
schedule
Cabinet number (a)
Option for a brief series of
nondestructive diagnostic tests.
Option for a longer, more
comprehensive series of both
destructive and nondestructive
diagnostic tests.
This option causes the test
sequence (short or long) to repeat
until the alarm (if any) is cleared or
a single test in the sequence fails.1
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command q ueue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.2
Examples:
test processor
test processor schedule
test processor a
test processor 1a
test processor a sh
test processor a l c
1 If no alarms are registered against the maintenance objec t then the test sequence is run only once. The
long
clear
option forces a clear of all alarms if no errors are encountered during testing. The
short clear
option only
clears alarms pertinent to tests in the short sequence.
2 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
See
below none