DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands

2-381test tdm

2
test tdm

This command tests all the time slots on a b us associated with a PPN or an EPN.

Action/
Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
test tdm
pn number
short
long
repeat number
clear
schedule
nn
= number of the port network to
have its TDM bus tested. Both
halves (“a” and “b ”) of the TDM
bus are tested.
Option for a brief series of
nondestructive diagnostic tests .
Option for a longer, more
comprehensive series of both
destructive and nondestruc tive
diagnostic tests.
How many times each test in the
sequence is repeated (1-100)
This option causes the test
sequence (short or long) to repeat
until the alarm (if any) is cleared or
a single test in the sequence fails.1
Command is validated and then a
scheduling form disp lays to
schedule execution of the
command. The command is then
placed in the command q ueue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.2
Examples:
test tdm port-network 1 l
test tdm port-network 2 sh r 2
test tdm port-network 2 sh sch
test tdm port-network 1 l r 25
test tdm port-network 2
test tdm port-network 1 c
1 If no alarms are registered against the maintenanc e object then the test sequence is run only onc e. The
long clear
option forces a clear of all alarms if no errors are enc ountered during testing. The
short clear
option only clears
alarms pertinent to tests in the short sequence.
2 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
Test
Sequence
= short;
Repeat = 1
none