DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-316BRI-PORT (ISDN-BRI Port), ABRI-PORT (ASAI ISDN-BRI Port)]

9
Figure 9-14. Path of the BRI Port Local LAN Loop Around
Table 9-140. Test #618 BRI Port Local LAN Loop Around
Error
Code Test
Result Description/ Recommendation
1015 ABORT The port is not in the out-of-service state.
1. Display the BRI Port Status form via the status bri-port PCSSpp
command to determine which stations or adjuncts are on this port.
2. Use the extension shown on this form in the status station com mand to
determine if the station or adjunct is in use.
3. If it is in use, wait until it is idle, and then busyout the port (using the
busyout port PCSSpp command) to place it in the out-of-service state
and repeat this test.
!WARNI NG:

Since the ‘‘busyout’’ comman d is destructive, exec ution of this

command prior to the port being idle c auses all calls associated with

BRI endpoints and all transactions associated with ASAI or Lucent

adjuncts on the port to be torn down. Note that third party c alls

established by an ASAI or Lucent adjunct remain connected even

though the port is taken out-of-service.

Continued on next page
BRI LINE
CIRCUIT
PACK
PACKET
INTERFACE
PACKET BUS
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
. . . .