DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1203PGATE-BD (Packet Gateway Circuit Pack)
9
These errors may be indicative of a ci rcuit pack prob lem, packet bus p roblem, or
a problem with another circ uit pack on the bus. This test is useful fo r verifying the
repair of the problem.
This test is non-destructive.
Receive FIFO Overflow Error Counter Test (#596)
The test reads and clears the Receive FIFO Overflow Error Counter on the Packet
Gateway circuit pac k. This counter is incremented by the c ircuit pack when it
detects its packet bus receive buffers overflow.
These errors can occur occ asionally due to the statistical sizing of the buffers.
Persistent occurrence of these errors may b e indicative of a cong ested circuit
pack. Distribution of a p ortion of the traffic load on the c ircuit pack to other c ircuit
packs in the system may b e necessary.
This test is non-destructive.
Table 9-479. TEST #595 LANBIC Receive Parity Error Counter Test
Error
Code Test
Result Description/ Recommendation
2000 ABORT Response to the test was not received from the circuit pack within the allowable
time period.
1. If the test fails repeatedly, attempt to reset the circuit pack.
2. If the test fails again, replace the circuit pack .
2100 ABORT Could not allocate the nec essary system resources to run this test.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
2500 ABORT Internal system error.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1-10 FAIL The circuit pack is still detecting errors of this type. The error code indicates the
value of the on-board error counter.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to fail, execute the ‘‘Packet Interface Test.’’.
3. If ‘‘Packet Interface Test’’ passes, see repair procedures for Packet Bus.
PASS No errors detected by circuit p ack.