Lucent Technologies Release 7 9-325BRI-PORT (ISDN-BRI Port), ABRI-PORT (ASAI ISDN-BRI Port)]

DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4 June 1999
Maintenance Object Repair Procedures
9-325BRI-PORT (ISDN-BRI Port), ABRI-PORT (ASAI ISDN-BRI Port)]
9
2 FAIL For the TN556 or TN2208, received a status of Level 1 Pending
Activation-Endpoint Active which indicates a problem with the BRI endpoint
or ASAI or Lucent adjunct, the wiring to the endpoint or adjunct, or the
ISDN-BRI port.
For the TN2198, received a status of Level 1 Pending Activation. U interface
up S/T interface down, which indicates a problem with the NT1 or the wiring
between the NT1 and the BRI endpoint (S/T interface).
1. As necessary, check and repair the wiring between the circuit pac k and
the endpoint or adjunct. Execute the test port PCSSpp command, and
review the results of the Level 1 Status Inquiry test to verify the repair. If
this test is still failing, proceed to Step 2.
2. For BRI endpoints, try replacing the BRI endpoint(s) connected to the
port. For ASAI or Lucent adjuncts, follow the recommended repair
procedures of the manufacturer for link communication problems. For
the NT1, follow the recommended repair procedures of the
manufacturer. Then execute the test port PCSSpp command, and
review the results of the Level 1 Status Inquiry test to verify repair. If this
test is still failing, proceed to Step 3.
3. Escalate the problem to the next tier.
3 FAIL Received a status of Level 1 Deactivated; the port is out-of-service.
1. Issue the status bri-port PCSSpp command to verify that the service
state of the port is out-of-service. If the service state of the port is not
out-of-service, escalate the problem to the next tier. Otherwise, proceed
to Step 2.
2. If the port has been placed out-of-service via the busyout port
PCSSpp command, try releasing the port by executing the release port
PCSSpp command. Then issue the test port long PCSSpp command,
and review the results of Level 1 Status Inquiry test. If this test is still
failing, proceed to Step 3.
3. After executing the test port long PCSSpp command, review the
results of all the tests. Follow the repair procedures for any tests that fail.
Verify repair of the problem by executing the test port PCSSpp
command and by determining that the Level 1 Status test passes. If the
test continues to fail for this reason, proceed to Step 4.
4. Escalate the problem to the next tier.
Table 9-143. TEST #621 Level 1 Status Inquiry — Continued
Error
Code Test Result Description/ Recommendation
Continued on next page