DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1094MODEM-PT (Modem Pool Port)
9
Table 9-434. TEST #99 Modem Pool Audit Test
Error
Code Test Result Description/ Recommendation
None ABORT The system was not able to allocate all the necessary resources to execute
this test. An ABORT simply indicates that the conversion resource was in use
when the audit was performed. No repair action is necessary unless the
conversion resource was known to be idle during the test (yellow in-use LED
was off) or was busied out before the test was run. In that case, a TN758
failure condition may exist and the following procedure should be used:
1. Busyout both of the TN758 Pooled Modem conversion resources on the
circuit pack containing the failing c onversion resource.
2. If the test continues to abort, replace the Pooled Modem circuit pack and
retest.
Continued on next page