DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-1018MAPD-BD (MAPD Interface Circuit Pack TN802)

9
NPE Connection Audit Test (#50)

The system sends a message to the on-board microprocessor to up date the

network connectivity translation for the SCOTCH-NPE chip on the c ircuit pack.

Table 9-392. System Technician-Demanded Tests
Order of Investigation Apply to
TN802?1
1. N = No; this test either passes or ABORTS with Error Code 2000 (problem with NT)
Short
Test
Sequence Long Test
Sequence
Reset
Board
Sequence D/ND2
2. D = De structive; ND = Nondestructive
NPE Connection Audit Test (#50) Y X ND
Control Channel Loop Test (#52) Y X ND
Loss of Signal Alarm Inquiry Test
(#138) NXX ND
Blue Alarm Inquiry Test (#139) N X X ND
Red Alarm Inquiry Test (#140) N X X ND
Yellow Alarm Inquiry Test (#141) N X X ND
Major Alarm Inquiry Test (#142) N X X ND
Minor Alarm Inquiry Test (#143) N X X ND
Slip Alarm Inquiry Test (#144) N X X ND
Misframe Alarm Inquiry Test (#145) N X X ND
Translation Update Test (#146) N X X ND
SAKI Sanity Test (#53) Y X D
Continued on next page
Table 9-393. TEST #50 NPE Connection Audit Test
Error
Code Test
Result Description/ Recommendation
None
2100 ABORT System resources required for this test are not available.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1019 ABORT The test aborted because a test was already running on the port.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
Continued on next page