DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-236status conference
8
In Use Is the endpoint currentl y participating in the conference or in p rocess of
connecting to the c onference? - y, c, e, f, n, blank.
y means that the endpoint is in use and is fully connected on all media
in an active conferenc e.
c means that the endpoint is in use and is fully connected, however the
endpoint has chang ed the conference audio or video cap ability or has
changed the rate of the c onference bec ause of rate adaptation. This
condition requires ana lysis of this endpoint’s c apabilities and mode
fields to identify which capability was reduced.
e means that the endpoint is in use b ut the endpoint had capability
problems. The endpoint d oes not have one of the required capabilities
(Vid, Bhl, MLP) to be a full particip ant. For MLP capabilities, see the
“T120” field. This cond ition requires analysis of this endp oint’s
capabilities and mode field to id entify the missing cap ability.
f means that the endpoint is in use b ut is not connected to all media.
This indicates that the endp oint has declared all the required
capabilities (c hannel/video/ audio/data) b ut is not fully connected to all
conference media at this time. This endpoint may be in the p rocess of
connecting, has failed to connect, or is not a valid video source. This
condition requires ana lysis of this endpoint’s c apabilities and mode
fields to identify the problem.
n means that the endpoint was co nnected in a conferenc e but has/was
disconnected or attempted to conn ect to a conference b ut was
unsuccessful.
blank means the field is blank until the first c all is made from/to the
endpoint.
Chl Data on the quantify and q uality of channels (transfer rate)? - y, e, n,
blank
y the endpoint has the required num b er of channels.
e means that the endpoint has not d eclared supp ort for the correct
number of channels and c annot particip ate fully in the conference.
n means that the endpoint has d eclared the correc t number of
channels, but all the cha nnels have not yet joined the conferenc e, due
to either a network or endpoint p roblem.
blank Audio add-on end points always have the Chl field set to blank.