DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
About this Book
xxiiConventions Used in This Document
— All occurrences of G3siV4, G3siV4+m, G3siV5, and G3siV5+m are
called G3si unless a spec ific configuration is required to
differentiate among produc t offerings
— All occurrences of G3 with out a s uffix following the “3” refer to
G3vs, G3si, and G3r
■A component of a DEFINITY System, such as a circuit pac k, occurring
without a reference to any specific system, is part of G3
■DEFINITY Communications Sever is abbreviated DEFINITY ECS
■All physical dimens ions in this book are in English (Foot Pound Second)
(FPS) followed by metric Centimeter Grams Second) (CGS) in p arenthesis.
Wire gauge measurements are in AWG followed by the d iameter in
millimeters in parenthesis.
■Information you type at the management te rminal is shown in the following
typeface: list system-parameters maintenance
■Information displayed on the management terminal screen is shown in the
following typeface: login
■Keyboard keys are shown in the following typeface: Ente r.
■Circuit pack cod es (such as TN790 or TN2182B) are shown with the
minimum acceptab le alphabetic su ffix (like the ‘‘B” in the code TN2182B).
Generally, an alphabetic suffix higher than that shown is also accep table.
However, not every
vintage
of either the minimum suffix or a higher suffix
code is necessarily acceptable.
NOTE:
Refer to
Technical Monthly: Reference Guide for Circuit Pack Vintages and Change Notices
, for current information about the
usable vintages of spe cific circ uit pack cod es (including the suffix)
in a Release 7 system.
■Admonishments used in this b ook are as follows:
!CAUTION:
This sign is used to indic ate possible harm to softw are, possible loss of data, or possible servic e interruptions.
!WARNING:
This sign is used where there is possib le harm to hardware or equipment.
!DANGER:
This sign is used to indic ate possible harm or injury to p eople.