DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-880FIBER-LK (Fiber Link)
9
Table 9-336. TEST #989 SNI Fiber Out of Frame Query
Error
Code Test
Result Description/ Recommendation
1415 ABORT The lightwave transceiver is not present for endpoint 1 of the fiber link (list
fiber-link can be used to display fiber link endpoints).
1. If a lightwave transceiver is not supposed to be present, d o nothing. For
example, an SNI connected to a DS1 CONV circuit pack or an SNI with a
metallic connection does not have a lightwave transceiver.
2. Otherwise, continue with the following steps.
3. Check the lig htwave transceiver connec tions.
4. Replace the lightwave transceiver.
5. Replace the SNI circuit pack.
1416 ABORT The lightwave transceiver is not present for endpoint 2 of the fiber link (list
fiber-link can be used to display fiber link endpoints).
1. If a lightwave transceiver is not supposed to be present, d o nothing. For
example, an SNI connected to a DS1 CONV circuit pack or an SNI with a
metallic connection does not have a lightwave transceiver.
2. Otherwise, continue with the following steps.
3. Check the lig htwave transceiver connec tions.
4. Replace the lightwave transceiver.
5. Replace the SNI circuit pack.
2100 ABORT Could not allocate the nec essary system resources to run this test .
1. Retry the command at 1-minute intervals a maximum of 3 times.
2300 ABORT The downlink message necessary to run this test could not be sent.
1. Retry the command at 1-minute intervals a maximum of 3 times.
2301 ABORT The software timer could not be set before sending the downlink message
necessary to run this test.
1. Retry the command at 1-minute intervals a maximum of 3 times.
2304 ABORT The SNI circuit pack responded that it is not able to run the test requested by
software.
1. Retry the command at 1-minute intervals a maximum of 3 times.
Continued on next page