DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-193restore disk
8
Parameters
Output
The following display shows a typ ical result when restore announcements is
entered.
restore disk
This c omman d cop ies a ll inf ormat ion fr om the t ape d evic e in t he spe cifi ed SPE to
the disk device on the sam e carrier. Defaults are a full restore and, if the SPE is
duplicated, both SPEs.
NOTE:
The restore command can take up to 1 hour to complete. Avoid p ressing
the ENTER key on the keyboard during this time, since d oing so will cause
the result messages to be lost.
disk This specifies cop ying the announcement data stored on the disk device. Di sk
is the default device.
tape This specifies cop ying the announcement data stored on the tape device.
Processor The SPE from whose MSS device the announc ement data was copied .
Command
Completion
Status
This field indicates the results of the command execution an gives a
self-explanatory reason for any failures.
Error Code A number indicating whether the announcement file was succ essfully
restored to the announcement b oard:
0 = The restore was success ful.
1 = The restore failed.
restore disk [active | standby] [spe-a | spe-b] [both | either]
[incremental | full]
restore announcements Page 1 of 1 SPE A
RESTORE ANNOUNCEMENTS
Processor Command Completion Status Error Code
SPE-A Success 0