DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1931WAE-PORT (Wideband Access Endpoint Port)
9
network facilities. However, bec ause maintenance capab ilities are limited to the
Wideband Acc ess Endpoint interface, and because faults can o ccur end-to-end,
troubleshooting proced ures based on an end -to-end view of the network is
required.
Wideband acc ess endpoint port main tenance provides a strateg y to maintain a
wideband ac cess endpoint p ort via a port on the Universal DS1 interface c ircuit
pack hardware. The maintenance strateg y covers logg ing wideband access
endpoint port hard ware errors, running tests for port initialization , periodic and
scheduled maintenanc e, demand tests, and alarm escalation and resolution. Two
different port service states are sp ecified in the wid eband acces s endpoint port
maintenance:
■
out-of-service
: the port is in a deact ivated state and cannot b e used for
calls
■
in-service
: the port is in an activated state and can be used for calls
If the UDS1 Interface circuit pac k is out of service, all ports on it are taken
out of service and a Warning alarm is raised.
Error Log Entries and Test to Clear Values
Table 9-715. Wideband Access Endpoint Maintenance Error Log Entries
Error
Type Aux
Data Associated Test Alarm
Level On/Off
Board Test to Clear Value
01
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the appropriate
test description and follow the recommended proc edures.
0 Any Any Any test access-end point
extension
sh r 1
18(a) 0 busyout access-endpoint WARNING OFF release access-endpoint
extension
130(b) None WARNING ON test access-end point
extension
1281(c) Conference Circuit (Test
#7) MINOR ON test access-endpoint
extension
l r 4
1537(d) NPE Crosstalk Test (#6) MINOR ON test access-endpoint
extension
l r 3
1793(e) None test board
UUCSS
long
3840(f) Any Port Audit and Update
(Test #36)