DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-373upgrade software
8
Command History Log
Unlike other commands, the up grade software command is logged into the
history log
before
it completes, prior to the sa ve translation step. A record of the
upg rade is sa ved o n the n ew ac tive SPE.
Alarm Origination
To prevent reporting of alarms generated by the upgrade, alarm origination is
suspended d uring the execution of the comma nd. After a successful interc hange
on a sy stem w ith d upl icat ed SPE, alarm orig inat ion re mains susp end ed f or
approximately 5 minutes, or until the newly ac tive SPE is ready to begin normal
maintenance.
Enable All
All previously disabled maintenance objec ts are re-enabled following the
upgrade. If the c ommand is canceled , disables are preserve d.
Parameters
Output
The following display shows a typ ical result when busyout ds1-facility 2e1a is
entered.
For more information see the following sections at the b eginning of this c hapter:
‘‘Busyout and Release Commands’’ and ‘‘Common Outp ut Fields’’.
UUCSSf The location of a DS1 Converter facility. F represents a letter (a-d ) used to
identify the separate DS1 facilities c onnected to the DS1 Converter.
override This option must be used to b usyout the facility on a DS1 Converter that is
carrying the pac ket traffic and cont rol messages. See the caution note
above.
Port The DS1 facility as described above in UUCSSf.
busyout ds1-facility 02e01a
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
02E01A DS1-FAC PASS
Command successfully completed