DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1475SNI-BD (SNI Circuit Pack)
9
115 FAIL The SNI circuit pack cannot communicate with the SNI in slot 15 over the
packet path.
1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 15.
Use the display errors command to find any SNI-BD errors and use the
display alarms command to determine whether the errors have on-board
alarms. Then, follow the associated repair procedures for the SNI-BD as
described in the Maintenance manual.
2. Using the display errors command, check the error log for other SNI
circ uit pac ks with SNI-PEER error type 25 61. If ot her SNI c ircuit packs
have SNI -PEER error t ype 256 1 errors, replac e the SNI in slot 1 5.
Replacing an SNI may be service interrupting. Refer to the SNI-BD
Maintenance documentation for the procedure for replacing an SNI.
NOTE:
If other SNI circuit packs do not have SNI-PEER error type 2561 errors,
the problem could be at either of the peer SNI boards. It is arbitrary as
to which SNI is replaced first.
3. Replace the SNI being tested.
4. Replace the SNI in slot 15.
116 FAIL The SNI circuit pack cannot communicate with the SNI in slot 16 over the
packet path.
1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 16.
Use the display errors command to find any SNI-BD errors and use the
display alarms command to determine whether the errors have on-board
alarms. Then, follow the associated repair procedures for the SNI-BD as
described in the Maintenance manual.
2. Using the display errors command, check the error log for other SNI
circ uit pac ks with SNI-PEER error type 28 17. If ot her SNI c ircuit packs
have SNI -PEER error t ype 281 7 errors, replac e the SNI in slot 1 6.
Replacing an SNI may be service interrupting. Refer to the SNI-BD
Maintenance documentation for the procedure for replacing an SNI.
NOTE:
If other SNI circuit packs do not have SNI-PEER error type 2817 errors,
the problem could be at either of the peer SNI boards. It is arbitrary as
to which SNI is replaced first.
3. Replace the SNI being tested.
4. Replace the SNI in slot 16.
Table 9-564. TEST #767 Packet Neighbor Link Test — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page