DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-344BRI-SET, ASAI-ADJ, BRI-DAT
9
p. For Error 2568 indicates that the adjunct id is invalid, check the v ender id
or software running on the Lucent ad junct
System Technician-Demanded Tests:
Descriptions and Error Codes
When inspecting errors in the system and deciding whic h ones to address,
always investigate errors associated with th e circuit pack and port first. Clearing
these error codes first may also c lear errors generated against the end point.
When all circuit pack and port errors have been cleared , and errors still exist
against the endpoint, always investigate errors in the order they are presented in
58 Bearer
Capability Not
Presently
Available
Requested bearer capability is imple mented,
but not administered. No B- channel
administered. See recommend ation 50 above.
65 Bearer Service
Not
Implemented
Requested service not implemented in switch
or endpoint.
69 Requested
Facility Not
Implemented
Requested service not supported in switch or
endpoint.
1. Consult switch and endpoint
documentation to deter mine service
support.
2. If Step 1 does not resolve the prob lem,
escalate to the next tier.
81 Invalid CRV An invalid CRV was sent by the adjunct.
1. This may indicate a CRV inconsistency
between the switch and the ad junct. See
the CallVisor protocol reference manual.
2. If step 1 does not resolve the p roblem,
escalate to the next tier.
Table 9-150. ISDN-BRI CAUSE VALUES — Continued
Error
Code Test Result Description/ Recommendation
Continued on next page