DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-844EXP-PN (Expansion Port Network)
9
EPN Warm Restart (#956)
The EPN Warm Restart, or EPN Reset Level 1, using the command reset
port-network P level 1 is used to restart an EPN that has not been taken
out-of-service. It is the least severe of the EPN restart levels and is used in an
attempt to preserve the state of the system as muc h as possible, thereb y
reducing user imp act. This restart is attempted on a EPN if it is still in-service, or
as a result of a system technician-d emanded EPN Warm Restart.
During an EPN Warm Restart all calls are preserved includin g voice, data, and
packet calls. Onc e an event has occurred that req uires a warm restart, service is
fully restored within 35 seconds.
Table 9-319. TEST #956 EPN Warm Restart
Error
Code Test
Result Description/ Recommendation
2100 ABORT Could not allocate the necessary system resources to execute this reset.
1. Retry the command at 1-minute intervals for a maximum of 3 times.
1386 ABORT The system link to this EPN is unavailable and cannot be used. This reset
cannot be executed without the link being operational.
1. Refer to SYS-LINK and resolve the link problem.
1387 ABORT This EP N is no t in a state where it is possible to perform a Warm R es tart on the
EPN. It is necessary to perform an EPN Cold Restart (EPN Reset Level 2)
because of one of the following reasons:
■The EPN is in an out-of-service state.
■Insufficient time has elapsed since the last EPN Cold Restart was
performed on this EPN.
2000 ABORT Response to a request made in the internal portion of this reset procedure
was not received within the allowable time period.
2500 ABORT Internal system error
1. Retry the command at 1-minute intervals for a maximum of 3 times.
FAIL Internal system error
1. Retry the reset command at 1-minute intervals for a maximum of 3 times.
PASS The EPN Warm Restart procedure completed successfully.
Continued on next page