DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-278status isdn-testcall
8
Output
Port This field specifies the p hysical address of the ISDN-PRI B-channel.
Bit Error
Rate The measured bit error count ac cording to the c omparison of the sent
and received b it pattern. The number is disp layed in scientific notation.
Number of
Bits The number of bits generated . The number is displayed in scientific
notation.
Block error
Rate The measured block error co unt according to the comparison of the
sent and received b it pattern. The number is dis played in scientific
notation.
Number of
Blocks The number of blocks gener ated. The number is displayed in scientific
notation.
Start Time The time the test call started (dd /hh:mm).
Duration
Specified The duration specified in m inutes for how long the test call should run.
Valid durations are 1-120 (minutes) or blan k (to indicate the default
amount of minutes was used to run the test).
Duration of
Test The duration specified in m inutes for how long the test call has b een
running. A blank indic ates that the default amount of time was used to
run the test.
Reason of
Termination The reason of termination indicates why the test call has terminated.
Valid reasons of termination are "finished," "canceled," "overflow," "no
bits," "transmission," "internal fail," "data corrupt," and "in progress ." A
termination reason of "finished" means the test finished in the sp ecified
time. A termination reason of "canceled" means the test ca ll has been
canceled with the "clear isdn-testcall" command. A r eason of "overflow"
denotes that the bits transmitted have overflowed buffer allocation. A
reason of "no bits" means that no bits have been received because the
ISDN-PRI test call circuit connection is b ad. A reason of "transmission"
means there has been a data transmission inte rruption, probab ly
caused from a power hit. A ter mination reason of "internal fail" specifies
that there is an internal error on the Maintenance/Test circ uit pack. A
reason of "in progress" means the test is still running and a reason of
"data corrupt" is used for any other error c ondition.